| This is the final sluice box. Dimensions in working position: 152x52x10,5cm |
 |
| Frontview of the sluice |
 |
| Sluice in transport position. Dimensions here: 90x51x10,5cm |
 |
| The Disentis funnel in working position. |
 |
| The NUggetbox. This part may vary because any style of riffels is possible. Here you see the standard version. The riffels have a declination of 70 degrees and alength of 2cm. |
 |
| The Frame. The black rubbers will guide the flitters to the miner's moss. That prevent flitters from gliding across the frame. |
 |
| Top view to the frame. The guides cover 50% of the frame. After that, tests show, that all heavy material was forced to flow over the miner's moss. |
 |
| The Disentis funnel. In working position, the sluice overall length is less than 1,20m, which is the limit for using it in the area of Disentis/Switzerland. |
 |
| Backview of the nuggetbox. Watch the rubber coverings at the bottom of the box. |
 |
| The dowel pin in the fron part of the sluice. It is fixed with a polystop screw. |
 |
| Standard funnel. In transport position, it is stored under the body of the sluice. |
 |
| The special design of the screwholes makes it possible to change the position of the funnel without completely loosening the screws. A quick release woulf be the best solution here! |
 |
| The carryiing strap attached to the sluice (example, only the strap included!). The colour may vary (red, blue, green, etc). The connection is done by carabiner with a maximum load of 40kg each. The size is adjustable between 0.8m and 1,5m. |
 |